Measuring for replacement windows, doors, and flooring is relatively straightforward. In each case, you will need to find the dimensions of each piece. When measuring for replacement windows, you will get the width, height, and depth of the opening. As with all construction projects, it is always a good idea to measure twice (or more) to ensure accurate results. Unfortunately, many inexpensive tape measures are inaccurate, so it pays to check the accuracy of your tools.
Measuring for replacement windows requires accuracy. To get an accurate width measurement, measure between the right and left jambs. These are the innermost surfaces on either side. Before measuring for replacement windows, however, remove any jamb liners from previous installations. Depending upon the manufacturer, you will want to order a product that is approximately one-fourth inch narrower, so be sure to look for that figure before ordering. When measuring height, you will want to see if there is a slope at the top and use the lowest point of that slope for your measurement and then deduct the manufacturer's recommended amount. The width is measured between the inside and outside stops. Traditionally, this number is between three and one-fourth inch and three and one-half inch.
For DIYers unfamiliar with the terminology, there is always help available from the renovation experts at Custom Order Online. They are only a phone call away and ready to answer any installation or measuring for replacement windows questions you may have as you work to reduce energy costs and increase property values in your home.